Old Revisions

These are the older revisons of the current document. To revert to an old revision, select it from below, click Edit this page and save it.

2024/05/20 20:38 power_switch – [Add battery measurement support (PCB V1.1)] breaker27 ±0 B (current)
2024/05/20 20:37 power_switch – [Add battery measurement support (PCB V1.1)] breaker27 +16 B
2024/05/20 20:35 power_switch – [Add battery measurement support (PCB V1.1)] breaker27 +46 B
2024/05/20 19:23 power_switch – [Buildup of PCB] breaker27 +451 B
2024/05/20 19:17 power_switch – [Partlist (in buildup order)] breaker27 +290 B
2024/05/20 19:14 power_switch – [Integrate it into a housing] breaker27 +114 B
2024/05/20 19:12 power_switch – [Modification of RFM12 power pin (PCB < V1.1)] breaker27 +1 KB
2024/05/19 18:28 power_switch – [Needed Parts and PCB] breaker27 -20 B
2015/11/15 20:59 power_switch – [Modification of RFM12 power pin (PCB < V1.1)] breaker27 ±0 B
2015/11/15 20:57 power_switch – [Modification of RFM12 power pin (PCB < V1.1)] breaker27 ±0 B
2015/11/15 20:57 power_switch – [Integrate it into a housing] breaker27 ±0 B
2015/11/15 20:47 power_switch – [Partlist (in buildup order)] breaker27 ±0 B
2014/03/02 17:12 power_switch – [Needed Parts and PCB] breaker27 ±0 B
2014/01/17 21:32 power_switch – [Buildup of PCB] breaker27 ±0 B
2014/01/12 19:00 power_switch – breaker27 ±0 B
2014/01/12 19:00 power_switch – [Flashing the firmware] breaker27 ±0 B
2014/01/12 11:38 power_switch – [Needed Parts and PCB] breaker27 ±0 B
2014/01/12 11:36 power_switch – [Buildup of PCB] breaker27 ±0 B
2014/01/12 11:36 power_switch – [Buildup of PCB] breaker27 ±0 B
2014/01/12 11:34 power_switch – [Partlist (in buildup order)] breaker27 ±0 B