env_sensor_micro2
This is an old revision of the document!
Table of Contents
Building up an Environment Sensor (SMD Version)
Needed Parts and PCB
You need a PCB. You may use the layout from Github and etch it yourself or order the PCB or a complete kit.
The envsensor using the SMD version powered with a CR2032 battery is designed to power only sensors with small power consumption or when the measuring cycle is big. For example, a CR2032 is good if you use the devise as window sensor. If your sensors need more power, you should use a bigger 3V battery or 2 AA(A) alcaline cells.
Partlist (in buildup order)
maybe extra pins, at your opinion.
Buildup of PCB
Connecting Sensors
Please read about it in the description of the [env_sensor|Generic Midi (THT technology)] description.
env_sensor_micro2.1461524875.txt.gz · Last modified: 2016/04/24 21:07 by breaker27