User Tools

Site Tools


rgb_dimmer

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
rgb_dimmer [2015/02/22 20:15]
breaker27 [Recommended LED module and resistors]
rgb_dimmer [2015/02/22 20:15] (current)
breaker27 [Recommended LED module and resistors]
Line 76: Line 76:
  
  
-For the "​max"​ resistors, you definitely need an extra heat sink at the LED module and resistors which can cope with the higher current (1W).+With the "​max"​ resistors, you definitely need an extra heat sink at the LED module and resistors which can cope with the higher current (1W).
  
 Use resistors which can tolerate the power they consume. The power is calculated as: Use resistors which can tolerate the power they consume. The power is calculated as:
rgb_dimmer.txt ยท Last modified: 2015/02/22 20:15 by breaker27