User Tools

Site Tools


dimmer

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
dimmer [2015/02/08 19:22]
breaker27 [Partlist (in buildup order)]
dimmer [2015/02/08 19:23] (current)
breaker27 [Integrate it into a housing]
Line 67: Line 67:
 You can either use an extra housing or integrate the device directly into the housing of a CFL lamp. See the  [[http://​www.smarthomatic.org/​devices/​dimmer.html|picture on the website]] for an example. You can either use an extra housing or integrate the device directly into the housing of a CFL lamp. See the  [[http://​www.smarthomatic.org/​devices/​dimmer.html|picture on the website]] for an example.
  
-It is very important to use **shielded cables for the 1-10V control voltage**. If you use unshielded cables and they are near the high voltage cables, ​intereferences ​can crash your microcontroller when you switch on the lamp.+It is very important to use **shielded cables for the 1-10V control voltage**. If you use unshielded cables and they are near the high voltage cables, ​interferences ​can crash your microcontroller when you switch on the lamp.
dimmer.txt ยท Last modified: 2015/02/08 19:23 by breaker27