Differences

This shows you the differences between two versions of the page.

--- build_your_own_firmware [2013/10/04 18:56] – external edit 127.0.0.1
+++ build_your_own_firmware [2013/10/05 10:37] (current) – breaker27
@@ Line 2: / Line 2: @@
 Get a copy of the project, if you haven't already. When you're running Debian (or another Linux) this will do the job: <code>git clone git://github.com/breaker27/smarthomatic</code>
-Go into the base station firmware directory, build the firmware
-<code>pi@ninjablock ~/test $ cd smarthomatic/firmware/shc_basestation/
+Go into the subdirectory of the device you want to build (e.g. "firmware/shc_basestation/") and build the firmware:
-pi@ninjablock ~/test/smarthomatic/firmware/shc_basestation $ make
+<code>john@doe:~/shc$ cd smarthomatic/firmware/shc_basestation/
+john@doe:~/shc/smarthomatic/firmware/shc_basestation$ make
 avr-gcc -c -gdwarf-2 -DF_CPU=20000000UL -DUART_BAUD_RATE=19200UL -DUART_RX=1UL -Os -mmcu=atmega328 -I.  -fdata-sections -ffunction-sections -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wundef -std=c99  -Wa,-adhlns=build/
 [...]
@@ Line 19: / Line 20: @@
    text    data     bss     dec     hex filename
       33     739   18036    4674 build/shc_basestation.elf
-pi@ninjablock ~/test/smarthomatic/firmware/shc_basestation $
+john@doe:~/shc/smarthomatic/firmware/shc_basestation$
 </code>
+The resulting files are stores in the **bin** subdirectory from where you started the make command.