User Tools

Site Tools


base_station

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
base_station [2013/11/17 13:45]
breaker27 [Buildup of PCB]
base_station [2014/03/02 17:11] (current)
breaker27 [Needed Parts and PCB]
Line 3: Line 3:
 ===== Needed Parts and PCB ===== ===== Needed Parts and PCB =====
  
-You need a **PCB**. You may use the layout from [[https://​github.com/​breaker27/​smarthomatic/​tree/​master/​hardware/​generic_maxi_speed_1|Github]] and etch it yourself or [[https://​www.smarthomatic.com/​shop/​|order]] the PCB or a complete kit.+You need a **PCB**. You may use the layout from [[https://​github.com/​breaker27/​smarthomatic/​tree/​master/​hardware/​generic_maxi_speed_1|Github]] and etch it yourself or [[https://​www.smarthomatic.org/​shop/​|order]] the PCB or a complete kit.
  
 The base station is designed to run 24/7 on 5V and to be connected to a PC, so you may prefer a stabilized 5V power supply, and not running on batteries. Any USB power supply will do well, and many mobile phone chargers are working at 5V. The base station is designed to run 24/7 on 5V and to be connected to a PC, so you may prefer a stabilized 5V power supply, and not running on batteries. Any USB power supply will do well, and many mobile phone chargers are working at 5V.
base_station.txt ยท Last modified: 2014/03/02 17:11 by breaker27