Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
change of SHT15 SCK pin to PC2
#1
To avoid conflicts with using I2C sensors and SHT15 in parallel, the SCK pin of the SHT15 has to be connected to PC2 instead of PC4 in the future. This is valid from the current develop version on (> 0.6.0).

Read the discussion here.

A description about the connection can be found in the hardware assemly instructions in the wiki.


Forum Jump:


Users browsing this thread: 1 Guest(s)